Focus on customer made high quality power lithium battery and test equiment to very application.
Medium - and High - Voltage Side Distributed Energy Storage Product Series
- Three levels: cell level, pack level, and system level to prevent re-ignition
Four-level fire warning, three-layer security architecture design, early identification of system warning risks
Combined with AI technology, intelligent monitoring system online data, real-time diagnosis of equipment status, early warning
Streamlined and Flexible
- Ultra - simple Layout: The AC and DC components are vertically arranged, eliminating the floor space occupied by the PCS (Power Conversion System) and water - cooling units. The volume of a single product is reduced by 25%.
- Dynamic Capacity Expansion: The products can be placed back - to - back or side - by - side, maximizing space utilization. Flexible capacity expansion is not restricted by the site.
Lower Levelized Cost of Storage (LCOS)
- Extra - long Lifespan: Balancing technology improves battery consistency, extends the system lifespan, and ensures high economic efficiency of the system.
- Efficient Heat Dissipation: Using the PACK liquid - cooled heat dissipation mode, the temperature difference of battery cells is ≤ 2.8℃. Auxiliary energy consumption is reduced by 30%, saving operating costs.
- Cluster - level Management: One management per cluster, with current - sharing control among clusters. There is no "barrel effect". The depth of discharge can be adjusted, and the charge - discharge capacity over the entire life cycle is increased by 8%.
Convenient and Reliable
- One - click Power - on: Performance and function debugging are completed before leaving the factory. There is no need for on - site debugging. The equipment can be connected to the grid as soon as it arrives at the station.
- Minimum Cut - off Quantity: One Power Conversion System (PCS) per cluster, operating independently. Compared with traditional solutions, the fault loss is reduced by 90%.
- Resistance to Harsh Environments: Adaptable to various outdoor environments, such as high temperature, high salt spray, high cold, high humidity, high altitude, etc.
Smart Control
-
- Remote Management: Enable online intelligent monitoring to reduce the frequency of manual inspections.
- Dynamic Adjustment: Conduct high - precision State of Charge (SOC) assessment and dynamically adjust energy efficiency management strategies according to the load.
- Multi - mode Switching: Built - in multiple working modes such as peak - shaving and valley - filling, demand response, backup power supply, and command response
High Performance Management
- Single cluster management, standard working condition energy conversion efficiency>88%, extreme energy conversion efficiency>90%, single cluster energy utilization rate increased by 15%
- The temperature difference of the battery cell is ≤3℃, the maximum temperature rise is ≤5℃, the maximum temperature under extreme working conditions is ≤50℃, and the cycle life is increased by 20%.
- Power conservation in winter, auxiliary losses reduced by 20%
Flexible installation
· Ultra - simple Layout: The AC and DC components are vertically arranged, eliminating the floor space occupied by the PCS (Power Conversion System) and water - cooling units. The volume of a single product is reduced by 25%.
· Dynamic Capacity Expansion: The products can be placed back - to - back or side - by - side, maximizing space utilization. Flexible capacity expansion is not restricted by the site.
Lower Levelized Cost of Storage (LCOS)
· Extra - long Lifespan: Balancing technology improves battery consistency, extends the system lifespan, and ensures high economic efficiency of the system.
· Efficient Heat Dissipation: Using the PACK liquid - cooled heat dissipation mode, the temperature difference of battery cells is ≤ 2.8℃. Auxiliary energy consumption is reduced by 30%, saving operating costs.
· Cluster - level Management: One management per cluster, with current - sharing control among clusters. There is no "barrel effect". The depth of discharge can be adjusted, and the charge - discharge capacity over the entire life cycle is increased by 8%.
Convenient and Reliable
· One - click Power - on: Performance and function debugging are completed before leaving the factory. There is no need for on - site debugging. The equipment can be connected to the grid as soon as it arrives at the station.
- Minimum Cut - off Quantity: One Power Conversion System (PCS) per cluster, operating independently. Compared with traditional solutions, the fault loss is reduced by 90%.
- Resistance to Harsh Environments: Adaptable to various outdoor environments, such as high temperature, high salt spray, high cold, high humidity, high altitude, etc.
Intelligent Operation and Control
· Remote Management: Enable online intelligent monitoring to reduce the frequency of manual inspections.
· Dynamic Adjustment: Conduct high - precision State of Charge (SOC) assessment and dynamically adjust energy efficiency management strategies according to the load.
· Multi - mode Switching: Built - in multiple working modes such as peak - shaving and valley - filling, demand response, backup power supply, and command response.
more specification
BESS SOLUTION
About LISINER
LINISER which is son company of Gelly Auto Group, serves as a BESS manufacturer of home lighting since 2012. The company takes up an area of 36,000, We enroll 1200 workers, consisting of the design team, R&D team, production team, and after-sales team.
A total of 59 designers are responsible for the structure and appearance of the products. We have 63 staff to monitor the finished products at different processing phrases. With all the staff full of responsibility, we strive for being the BESS specialist with a commitment to quality.
FAQ